Other listings by this author |
|
 MITCalc Shells 1.13 (Downloads: 1029)
Shells - Deformation and stress of rotational shells The calculation concerns solutions of pressure vessels and their components. The calculation solves deformations and curves of stress in rotational shells loaded with axial force, pressure, radial force and a bending moment. This program is intended for homogeneous shells of identical thickness and a single material. The calculation also enables solutions for connecting two shells of different parameters (thickness, material, dimensions...).
The program enable...
|
|
 MITCalc3D for SolidWorks 1.60 (Downloads: 376)
Mechanical, Industrial and Technical Calculations for SolidWorks MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will
reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a
technical problem, or a calculation of an engineering point without any significant need for expert knowledge.
MITCalc contains both design and check calculations of many common tasks, such as: spur and bevel gear, b...
|
|
 MITCalc - Technical Formulas 1.19 (Downloads: 582)
Technical formulas (Solids, motion, friction...) / Units convertor Solutions to dozens of basic formulas from physics, technology and mechanical engineering. Help, pictures as well
as many selection tables with values of various coefficients and material properties are available for the formulas.
The following matters are solved in the workbook:
- Characteristics of solids (volume, surface, weight, inertia moment)
- Rectilinear motion (speed, acceleration, trajectory, time, force, energy....)
- Rot...
|
|
 MITCalc Springs 15 types 1.17 (Downloads: 1256)
Geometrical design and strength check of 15 springs types The calculation is to be used for geometrical and strength design of metal springs of various types and designs, subjected to static or cyclic loads. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:
1) Geometrical design and calculation of working cycle parameters for metal springs of the following types and
designs:
- Helical cylindrical compression springs of round...
|
|
 MITCalc V-Belts Calculation 1.22 (Downloads: 1236)
Geometric design and strength check of V-belt transmission The calculation is designed for a geometrical design and strength check of belt transmissions using V-belts. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:
- Calculation for 2 or 3 pulleys.
- Automatic design of a transmission with the minimum of input requirements.
- Design and calculation of geometrical parameters (diameters of pulleys, axis distances, length of the...
|
|
 MITCalc Tolerances 1.20 (Downloads: 1260)
Tolerances, deviations and fits of machine parts This calculation includes tables and calculations for easy option of fits of machine parts and determination of their dimensional tolerances and deviations. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:
- Selection of suitable fits of machine parts according to the international standard ISO 286.
- Determination of dimensional tolerances and deviations of machine parts ac...
|
|
 MITCalc Profiles Calculation 1.20 (Downloads: 1311)
Area characteristic of profiles and mass characteristic of solids The calculation solves area characteristics of profiles created in a simple graphic editor and mass characteristics of solids created by extrusion or rotation of the profile. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following tasks:
- Creation of a profile in a simple graphic editor.
- Calculation of area characteristics (Ix, Sx) for main axes passing through the centre of gravity.
...
|
|
 MITCalc Tolerance analysis 1.19 (Downloads: 1209)
Tolerance analysis of linear, 2D and 3D dimensional chains Two programs for the tolerance analysis of linear, 2D and 3D dimensional chains
1) Tolerance analysis of linear dimensional chains.
The program is designed for tolerance analysis of linear (1D) dimensional chains. The program solves the following
problems:
- Tolerance analysis, synthesis and optimization of a dimensional chain using the arithmetic "WC" (Worst case) method, possibly the statistical "RSS" (Root Sum Square...
|
|
 MITCalc Rolling Bearings Calculation I 1.20 (Downloads: 1332)
Selection, calculation and check of rolling bearings SKF This module can be used for the selection, calculation and check of rolling bearings of the company SKF. The programme provides solutions to the following tasks:
- Selection and check of a suitable bearing. The document includes a database of approx. 10,000 different rolling bearings SKF in all basic types and design.
- Calculation of basic bearing parameters (life, static safety, etc.).
- Calculation of adjusted bearing life acc. to the new met...
|
|
 MITCalc Planet Gear Calculation 1.17 (Downloads: 1203)
Geometric design and strength check of planet gear (straight and helical) Geometric design and strength check of planetary gearing with straight and helical toothing. Application is developed in MS
Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:
- Calculation of helical and straight toothing.
- Automatic design of a transmission with the minimum number of input requirements.
- Design for entered coefficients of safety (static, dynamic).
- Calculation of...
|
|
 MITCalc Torsion Springs 1.22 (Downloads: 1434)
Geometric and strength designs of spiral cylindrical torsion springs The calculation is intended for the purposes of geometric and strength designs of spiral cylindrical torsion springs made of wires and rods in circular sections, cold formed, loaded with a static or cyclic loading. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:
- Automatic design of the spring.
- Selection of the optimal design of the spring with respect to strength, geo...
|
|
 MITCalc Shaft connection 1.23 (Downloads: 1343)
Designs and strength checks of shaped connections of shafts with hubs The calculation is designed for geometric designs and strength checks of shaped couplings of shafts with hubs. The application provides solutions for the following tasks:
- Design of a coupling with parallel side keys.
- Design of a coupling with Woodruff's keys.
- Design of a coupling with straight-sided splines.
- Design of a coupling with involute splines.
- Strength check of designed couplings.
- The application includes a ta...
|
|
 MITCalc Multi pulley calculation 1.21 (Downloads: 1354)
Designs of belt and chain transmission with more sprocket wheels The calculation is developed for geometrical designs of belt and chain transmissions with more sprocket wheels (max. 15). Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:
- Calculation of the necessary length of the belt (chain) using known positions and diameters of sprocket wheels
- Achieving the desired (table) length of the belt / chain using a change in the position of ...
|
|
 MITCalc Tension Springs 1.22 (Downloads: 1467)
Geometric and strength designs of helical tension cylindrical springs The calculation is intended for the purposes of geometric and strength designs of helical tension cylindrical springs made of wires and rods of circular sections, loaded with static loading. . Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:
- Automatic design of the spring.
- Selection of an optimal alternative of the spring design in view of strength, geometry and weight.
|
|
 MITCalc Spur Gear Calculation 1.24 (Downloads: 1226)
Geometric design and strength check of spur gear (straight and helical) Geometric design and strength check of spur gear with straight and helical toothing. Application is developed in MS
Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:
- Calculation of helical and straight toothing.
- Automatic design of a transmission with the minimum number of input requirements.
- Design for entered coefficients of safety (static, dynamic).
- Calculation of complet...
|
|
 MITCalc Straight beams calculation 1.21 (Downloads: 1504)
Calculations of the straight beams with constant cross section. The application is designed for calculations of straight, maximum three times static indefinite beams with constant axis-symmetrical profiles. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:
- Simple definition of the type of beam and its loading with visual check.
- Calculation of area characteristics of 20 types of cross sections.
- Calculation of reactions in supp...
|
|
 MITCalc Force shaft connection 1.20 (Downloads: 1027)
Designs and strength checks of force couplings of shafts with hubs The calculation is intended for geometrical design and strength check of force couplings of shafts with hubs with a cylindrical contact area (Interference fit, clamping connection). The application provides solutions for the following tasks:
- Design of force fits, possibly shrink fits.
- Design of clamping connections with separated, or one-side cut hub.
- Strength check of designed couplings.
- Check of interference fit strained by addi...
|
Advanced XLS Converter 2.55: With XLS Converter you can convert Excel (XLS) files into dozens of formats!
JaSFtp 11.10: JaSFtp - Automated SFTP client (secure FTP), Run 1000+ tasks on a schedule.
AbleFTP 11.10: AbleFtp - FTP client designed to automate and run 1000+ FTP tasks a day.